[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-5-686 (Debian 2.6.32-30) (ben@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Wed Jan 12 04:01:41 UTC 2011 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009ec00 (usable) [ 0.000000] BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 0000000020000000 (usable) [ 0.000000] BIOS-e820: 0000000020000000 - 0000000020200000 (reserved) [ 0.000000] BIOS-e820: 0000000020200000 - 0000000040000000 (usable) [ 0.000000] BIOS-e820: 0000000040000000 - 0000000040200000 (reserved) [ 0.000000] BIOS-e820: 0000000040200000 - 00000000bac1f000 (usable) [ 0.000000] BIOS-e820: 00000000bac1f000 - 00000000bac78000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bac78000 - 00000000badab000 (reserved) [ 0.000000] BIOS-e820: 00000000badab000 - 00000000badbc000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000badbc000 - 00000000badd0000 (reserved) [ 0.000000] BIOS-e820: 00000000badd0000 - 00000000badd2000 (usable) [ 0.000000] BIOS-e820: 00000000badd2000 - 00000000badd3000 (ACPI data) [ 0.000000] BIOS-e820: 00000000badd3000 - 00000000baddb000 (reserved) [ 0.000000] BIOS-e820: 00000000baddb000 - 00000000bade5000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bade5000 - 00000000bae3e000 (reserved) [ 0.000000] BIOS-e820: 00000000bae3e000 - 00000000bae81000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bae81000 - 00000000bb000000 (usable) [ 0.000000] BIOS-e820: 00000000bb800000 - 00000000bfa00000 (reserved) [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved) [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 000000013fe00000 (usable) [ 0.000000] DMI 2.6 present. [ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xbb000 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-D3FFF write-protect [ 0.000000] D4000-E7FFF uncachable [ 0.000000] E8000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F00000000 write-back [ 0.000000] 1 base 100000000 mask FC0000000 write-back [ 0.000000] 2 base 0BB800000 mask FFF800000 uncachable [ 0.000000] 3 base 0BC000000 mask FFC000000 uncachable [ 0.000000] 4 base 0C0000000 mask FC0000000 uncachable [ 0.000000] 5 base 13FE00000 mask FFFE00000 uncachable [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 00000000bb800000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] initial memory mapped : 0 - 01800000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000373fe000 [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037000000 page 2M [ 0.000000] 0037000000 - 00373fe000 page 4k [ 0.000000] kernel direct mapping tables up to 373fe000 @ 10000-16000 [ 0.000000] RAMDISK: 17cdc000 - 1803fc15 [ 0.000000] ACPI: RSDP 000f0420 00024 (v02 ALASKA) [ 0.000000] ACPI: XSDT bac6a068 0004C (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FACP bac73f98 000F4 (v04 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: DSDT bac6a140 09E56 (v02 ALASKA A M I 00000000 INTL 20051117) [ 0.000000] ACPI: FACS baddcf80 00040 [ 0.000000] ACPI: APIC bac74090 00072 (v03 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: SSDT bac74108 00102 (v01 AMICPU PROC 00000001 MSFT 03000001) [ 0.000000] ACPI: MCFG bac74210 0003C (v01 ALASKA A M I 01072009 MSFT 00000097) [ 0.000000] ACPI: HPET bac74250 00038 (v01 ALASKA A M I 01072009 AMI. 00000004) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 2108MB HIGHMEM available. [ 0.000000] 883MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 373fe000 [ 0.000000] low ram: 0 - 373fe000 [ 0.000000] node 0 low ram: 00000000 - 373fe000 [ 0.000000] node 0 bootmap 00012000 - 00018e80 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00373fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0001000000 - 00014c9bb4] TEXT DATA BSS ==> [0001000000 - 00014c9bb4] [ 0.000000] #4 [0017cdc000 - 001803fc15] RAMDISK ==> [0017cdc000 - 001803fc15] [ 0.000000] #5 [000009ec00 - 0000100000] BIOS reserved ==> [000009ec00 - 0000100000] [ 0.000000] #6 [00014ca000 - 00014d020a] BRK ==> [00014ca000 - 00014d020a] [ 0.000000] #7 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000] [ 0.000000] #8 [0000012000 - 0000019000] BOOTMAP ==> [0000012000 - 0000019000] [ 0.000000] found SMP MP-table at [c00fcdd0] fcdd0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000373fe [ 0.000000] HighMem 0x000373fe -> 0x000bb000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[6] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009e [ 0.000000] 0: 0x00000100 -> 0x00020000 [ 0.000000] 0: 0x00020200 -> 0x00040000 [ 0.000000] 0: 0x00040200 -> 0x000bac1f [ 0.000000] 0: 0x000badd0 -> 0x000badd2 [ 0.000000] 0: 0x000bae81 -> 0x000bb000 [ 0.000000] On node 0 totalpages: 764206 [ 0.000000] free_area_init_node: node 0, pgdat c13b2860, node_mem_map c14d2200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3950 pages, LIFO batch:0 [ 0.000000] Normal zone: 1736 pages used for memmap [ 0.000000] Normal zone: 219958 pages, LIFO batch:31 [ 0.000000] HighMem zone: 4217 pages used for memmap [ 0.000000] HighMem zone: 534313 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000020200000 [ 0.000000] Allocating PCI resources starting at bfa00000 (gap: bfa00000:3f31c000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages/cpu @c3000000 s34296 r0 d23048 u1048576 [ 0.000000] pcpu-alloc: s34296 r0 d23048 u1048576 alloc=1*4194304 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 758221 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-686 root=UUID=4ddf7314-829e-47a5-81e1-24dad7e0fb1c ro quiet [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340 [ 0.000000] Initializing HighMem for node 0 (000373fe:000bb000) [ 0.000000] Memory: 3022024k/3063808k available (2501k kernel code, 33456k reserved, 1323k data, 376k init, 2154120k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xffd56000 - 0xfffff000 (2724 kB) [ 0.000000] pkmap : 0xff400000 - 0xff800000 (4096 kB) [ 0.000000] vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB) [ 0.000000] .init : 0xc13bd000 - 0xc141b000 ( 376 kB) [ 0.000000] .data : 0xc12716a1 - 0xc13bc460 (1323 kB) [ 0.000000] .text : 0xc1000000 - 0xc12716a1 (2501 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:1280 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] HPET: 8 timers in total, 4 timers will be used for per-cpu timer [ 0.000000] Fast TSC calibration using PIT [ 0.004000] Detected 3192.270 MHz processor. [ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 6384.54 BogoMIPS (lpj=12769080) [ 0.000009] Security Framework initialized [ 0.000012] SELinux: Disabled at boot. [ 0.000015] Mount-cache hash table entries: 512 [ 0.000069] Initializing cgroup subsys ns [ 0.000070] Initializing cgroup subsys cpuacct [ 0.000072] Initializing cgroup subsys devices [ 0.000074] Initializing cgroup subsys freezer [ 0.000075] Initializing cgroup subsys net_cls [ 0.000087] CPU: Physical Processor ID: 0 [ 0.000087] CPU: Processor Core ID: 0 [ 0.000090] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.000091] CPU: L2 cache: 256K [ 0.000092] CPU: L3 cache: 6144K [ 0.000095] mce: CPU supports 9 MCE banks [ 0.000104] CPU0: Thermal monitoring enabled (TM1) [ 0.000105] CPU 0 MCA banks CMCI:0 CMCI:1 CMCI:3 SHD:5 SHD:6 SHD:7 CMCI:8 [ 0.000112] using mwait in idle threads. [ 0.000115] Performance Events: Nehalem/Corei7 events, Intel PMU driver. [ 0.000118] ... version: 3 [ 0.000119] ... bit width: 48 [ 0.000120] ... generic registers: 8 [ 0.000121] ... value mask: 0000ffffffffffff [ 0.000122] ... max period: 000000007fffffff [ 0.000123] ... fixed-purpose events: 3 [ 0.000124] ... event mask: 00000007000000ff [ 0.000126] Checking 'hlt' instruction... OK. [ 0.013433] ACPI: Core revision 20090903 [ 0.027271] Not enabling x2apic, Intr-remapping init failed. [ 0.027274] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.027600] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.067187] CPU0: Intel(R) Core(TM) i5-2400 CPU @ 3.10GHz stepping 07 [ 0.172266] Booting processor 1 APIC 0x2 ip 0x6000 [ 0.182465] Initializing CPU#1 [ 0.260023] CPU: Physical Processor ID: 0 [ 0.260024] CPU: Processor Core ID: 1 [ 0.260026] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.260027] CPU: L2 cache: 256K [ 0.260028] CPU: L3 cache: 6144K [ 0.260039] CPU1: Thermal monitoring enabled (TM1) [ 0.260040] CPU 1 MCA banks CMCI:0 CMCI:1 CMCI:3 SHD:5 SHD:6 SHD:7 SHD:8 [ 0.260078] CPU1: Intel(R) Core(TM) i5-2400 CPU @ 3.10GHz stepping 07 [ 0.260083] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.280088] Booting processor 2 APIC 0x4 ip 0x6000 [ 0.290288] Initializing CPU#2 [ 0.367783] CPU: Physical Processor ID: 0 [ 0.367784] CPU: Processor Core ID: 2 [ 0.367785] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.367786] CPU: L2 cache: 256K [ 0.367787] CPU: L3 cache: 6144K [ 0.367798] CPU2: Thermal monitoring enabled (TM1) [ 0.367799] CPU 2 MCA banks CMCI:0 CMCI:1 CMCI:3 SHD:5 SHD:6 SHD:7 SHD:8 [ 0.367900] CPU2: Intel(R) Core(TM) i5-2400 CPU @ 3.10GHz stepping 07 [ 0.367905] checking TSC synchronization [CPU#0 -> CPU#2]: passed. [ 0.387911] Booting processor 3 APIC 0x6 ip 0x6000 [ 0.398110] Initializing CPU#3 [ 0.475543] CPU: Physical Processor ID: 0 [ 0.475543] CPU: Processor Core ID: 3 [ 0.475545] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.475546] CPU: L2 cache: 256K [ 0.475547] CPU: L3 cache: 6144K [ 0.475558] CPU3: Thermal monitoring enabled (TM1) [ 0.475559] CPU 3 MCA banks CMCI:0 CMCI:1 CMCI:3 SHD:5 SHD:6 SHD:7 SHD:8 [ 0.475623] CPU3: Intel(R) Core(TM) i5-2400 CPU @ 3.10GHz stepping 07 [ 0.475628] checking TSC synchronization [CPU#0 -> CPU#3]: passed. [ 0.495602] Brought up 4 CPUs [ 0.495604] Total of 4 processors activated (25541.92 BogoMIPS). [ 0.496715] CPU0 attaching sched-domain: [ 0.496717] domain 0: span 0-3 level MC [ 0.496719] groups: 0 1 2 3 [ 0.496722] CPU1 attaching sched-domain: [ 0.496723] domain 0: span 0-3 level MC [ 0.496725] groups: 1 2 3 0 [ 0.496727] CPU2 attaching sched-domain: [ 0.496728] domain 0: span 0-3 level MC [ 0.496729] groups: 2 3 0 1 [ 0.496732] CPU3 attaching sched-domain: [ 0.496733] domain 0: span 0-3 level MC [ 0.496734] groups: 3 0 1 2 [ 0.496845] devtmpfs: initialized [ 0.497043] regulator: core version 0.5 [ 0.497066] NET: Registered protocol family 16 [ 0.497107] ACPI: bus type pci registered [ 0.497145] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 63 [ 0.497147] PCI: Not using MMCONFIG. [ 0.509444] PCI: Using configuration type 1 for base access [ 0.509630] bio: create slab at 0 [ 0.510115] ACPI: EC: Look up EC in DSDT [ 0.511740] ACPI: Executed 1 blocks of module-level executable AML code [ 0.513770] ACPI Error (psargs-0359): [RAMB] Namespace lookup failure, AE_NOT_FOUND [ 0.513774] ACPI Exception: AE_NOT_FOUND, Could not execute arguments for [RAMW] (Region) (20090903/nsinit-338) [ 0.515191] ACPI: Interpreter enabled [ 0.515194] ACPI: (supports S0 S1 S3 S4 S5) [ 0.515207] ACPI: Using IOAPIC for interrupt routing [ 0.515239] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 63 [ 0.515336] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources [ 0.515338] PCI: Using MMCONFIG for extended config space [ 0.515492] ACPI: BIOS _OSI(Linux) query ignored [ 0.520220] ACPI: No dock devices found. [ 0.520447] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.520503] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.520505] pci 0000:00:01.0: PME# disabled [ 0.520526] pci 0000:00:02.0: reg 10 64bit mmio: [0xfe000000-0xfe3fffff] [ 0.520530] pci 0000:00:02.0: reg 18 64bit mmio pref: [0xc0000000-0xcfffffff] [ 0.520532] pci 0000:00:02.0: reg 20 io port: [0xf000-0xf03f] [ 0.520592] pci 0000:00:16.0: reg 10 64bit mmio: [0xfe707000-0xfe70700f] [ 0.520633] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.520636] pci 0000:00:16.0: PME# disabled [ 0.520685] pci 0000:00:1a.0: reg 10 32bit mmio: [0xfe706000-0xfe7063ff] [ 0.520733] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.520736] pci 0000:00:1a.0: PME# disabled [ 0.520770] pci 0000:00:1b.0: reg 10 64bit mmio: [0xfe700000-0xfe703fff] [ 0.520806] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.520809] pci 0000:00:1b.0: PME# disabled [ 0.520869] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.520872] pci 0000:00:1c.0: PME# disabled [ 0.520936] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.520939] pci 0000:00:1c.4: PME# disabled [ 0.521000] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 0.521003] pci 0000:00:1c.5: PME# disabled [ 0.521065] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold [ 0.521068] pci 0000:00:1c.6: PME# disabled [ 0.521129] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold [ 0.521132] pci 0000:00:1c.7: PME# disabled [ 0.521177] pci 0000:00:1d.0: reg 10 32bit mmio: [0xfe705000-0xfe7053ff] [ 0.521225] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.521228] pci 0000:00:1d.0: PME# disabled [ 0.521340] pci 0000:00:1f.2: reg 10 io port: [0xf110-0xf117] [ 0.521345] pci 0000:00:1f.2: reg 14 io port: [0xf100-0xf103] [ 0.521349] pci 0000:00:1f.2: reg 18 io port: [0xf0f0-0xf0f7] [ 0.521353] pci 0000:00:1f.2: reg 1c io port: [0xf0e0-0xf0e3] [ 0.521358] pci 0000:00:1f.2: reg 20 io port: [0xf0d0-0xf0df] [ 0.521362] pci 0000:00:1f.2: reg 24 io port: [0xf0c0-0xf0cf] [ 0.521400] pci 0000:00:1f.3: reg 10 64bit mmio: [0xfe704000-0xfe7040ff] [ 0.521411] pci 0000:00:1f.3: reg 20 io port: [0xf040-0xf05f] [ 0.521447] pci 0000:00:1f.5: reg 10 io port: [0xf0b0-0xf0b7] [ 0.521451] pci 0000:00:1f.5: reg 14 io port: [0xf0a0-0xf0a3] [ 0.521456] pci 0000:00:1f.5: reg 18 io port: [0xf090-0xf097] [ 0.521460] pci 0000:00:1f.5: reg 1c io port: [0xf080-0xf083] [ 0.521464] pci 0000:00:1f.5: reg 20 io port: [0xf070-0xf07f] [ 0.521469] pci 0000:00:1f.5: reg 24 io port: [0xf060-0xf06f] [ 0.521593] pci 0000:03:00.0: reg 10 io port: [0xe040-0xe047] [ 0.521601] pci 0000:03:00.0: reg 14 io port: [0xe030-0xe033] [ 0.521609] pci 0000:03:00.0: reg 18 io port: [0xe020-0xe027] [ 0.521617] pci 0000:03:00.0: reg 1c io port: [0xe010-0xe013] [ 0.521625] pci 0000:03:00.0: reg 20 io port: [0xe000-0xe00f] [ 0.521640] pci 0000:03:00.0: reg 30 32bit mmio pref: [0xfe600000-0xfe60ffff] [ 0.521679] pci 0000:03:00.0: supports D1 D2 [ 0.521681] pci 0000:03:00.0: PME# supported from D1 D2 D3hot [ 0.521685] pci 0000:03:00.0: PME# disabled [ 0.527517] pci 0000:00:1c.4: bridge io port: [0xe000-0xefff] [ 0.527529] pci 0000:00:1c.4: bridge 32bit mmio: [0xfe600000-0xfe6fffff] [ 0.527599] pci 0000:04:00.0: reg 10 64bit mmio: [0xfe500000-0xfe507fff] [ 0.527689] pci 0000:04:00.0: PME# supported from D3hot D3cold [ 0.527694] pci 0000:04:00.0: PME# disabled [ 0.535520] pci 0000:00:1c.5: bridge 32bit mmio: [0xfe500000-0xfe5fffff] [ 0.535572] pci 0000:05:00.0: reg 10 io port: [0xd000-0xd0ff] [ 0.535594] pci 0000:05:00.0: reg 18 64bit mmio pref: [0xd0004000-0xd0004fff] [ 0.535609] pci 0000:05:00.0: reg 20 64bit mmio pref: [0xd0000000-0xd0003fff] [ 0.535659] pci 0000:05:00.0: supports D1 D2 [ 0.535660] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.535665] pci 0000:05:00.0: PME# disabled [ 0.543481] pci 0000:00:1c.6: bridge io port: [0xd000-0xdfff] [ 0.543497] pci 0000:00:1c.6: bridge 64bit mmio pref: [0xd0000000-0xd00fffff] [ 0.543651] pci 0000:00:1c.7: transparent bridge [ 0.543654] pci 0000:00:1c.7: bridge io port: [0xc000-0xcfff] [ 0.543657] pci 0000:00:1c.7: bridge 32bit mmio: [0xfe400000-0xfe4fffff] [ 0.543713] pci 0000:07:00.0: reg 10 io port: [0xc000-0xc0ff] [ 0.543731] pci 0000:07:00.0: reg 14 64bit mmio: [0xfe480000-0xfe480fff] [ 0.543766] pci 0000:07:00.0: reg 30 32bit mmio pref: [0xfe460000-0xfe47ffff] [ 0.543873] pci 0000:07:01.0: reg 10 32bit mmio: [0xfe440000-0xfe45ffff] [ 0.543883] pci 0000:07:01.0: reg 14 32bit mmio: [0xfe420000-0xfe43ffff] [ 0.543893] pci 0000:07:01.0: reg 18 io port: [0xc100-0xc13f] [ 0.543929] pci 0000:07:01.0: reg 30 32bit mmio pref: [0xfe400000-0xfe41ffff] [ 0.543967] pci 0000:07:01.0: PME# supported from D0 D3hot D3cold [ 0.543973] pci 0000:07:01.0: PME# disabled [ 0.544060] pci 0000:06:00.0: transparent bridge [ 0.544069] pci 0000:06:00.0: bridge io port: [0xc000-0xcfff] [ 0.544074] pci 0000:06:00.0: bridge 32bit mmio: [0xfe400000-0xfe4fffff] [ 0.544113] pci_bus 0000:00: on NUMA node 0 [ 0.544116] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.544210] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 0.544247] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] [ 0.544287] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT] [ 0.544325] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX5._PRT] [ 0.544360] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX6._PRT] [ 0.544398] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX7.BR19._PRT] [ 0.547983] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.548054] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.548125] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *10 11 12 14 15) [ 0.548194] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 10 11 12 14 15) [ 0.548264] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 *7 10 11 12 14 15) [ 0.548333] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 0.548404] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 10 11 12 14 15) [ 0.548473] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 10 11 12 14 15) [ 0.548525] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.548530] vgaarb: loaded [ 0.548555] PCI: Using ACPI for IRQ routing [ 0.548666] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 24, 25, 26, 27, 0, 0 [ 0.548670] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.551383] hpet: hpet2 irq 24 for MSI [ 0.551463] hpet: hpet3 irq 25 for MSI [ 0.551530] hpet: hpet4 irq 26 for MSI [ 0.555486] hpet: hpet5 irq 27 for MSI [ 0.555503] Switching to clocksource tsc [ 0.556213] pnp: PnP ACPI init [ 0.556217] ACPI: bus type pnp registered [ 0.558219] pnp: PnP ACPI: found 14 devices [ 0.558220] ACPI: ACPI bus type pnp unregistered [ 0.558222] PnPBIOS: Disabled by ACPI PNP [ 0.558227] system 00:01: iomem range 0xfed10000-0xfed19fff has been reserved [ 0.558229] system 00:01: iomem range 0xe0000000-0xe3ffffff has been reserved [ 0.558230] system 00:01: iomem range 0xfed90000-0xfed93fff has been reserved [ 0.558232] system 00:01: iomem range 0xfed20000-0xfed3ffff has been reserved [ 0.558234] system 00:01: iomem range 0xfee00000-0xfee0ffff has been reserved [ 0.558237] system 00:02: ioport range 0x290-0x29f has been reserved [ 0.558241] system 00:07: ioport range 0x4d0-0x4d1 has been reserved [ 0.558244] system 00:0b: ioport range 0x400-0x453 has been reserved [ 0.558245] system 00:0b: ioport range 0x458-0x47f has been reserved [ 0.558247] system 00:0b: ioport range 0x500-0x57f has been reserved [ 0.558249] system 00:0b: iomem range 0xfed1c000-0xfed1ffff has been reserved [ 0.558250] system 00:0b: iomem range 0xfec00000-0xfecfffff could not be reserved [ 0.558252] system 00:0b: iomem range 0xfed08000-0xfed08fff has been reserved [ 0.558254] system 00:0b: iomem range 0xff000000-0xffffffff has been reserved [ 0.558256] system 00:0c: ioport range 0x454-0x457 has been reserved [ 0.592766] pci 0000:07:00.0: BAR 6: address space collision on of device [0xfe460000-0xfe47ffff] [ 0.592817] pci 0000:07:01.0: BAR 6: address space collision on of device [0xfe400000-0xfe41ffff] [ 0.592913] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.592914] pci 0000:00:01.0: IO window: disabled [ 0.592916] pci 0000:00:01.0: MEM window: disabled [ 0.592918] pci 0000:00:01.0: PREFETCH window: disabled [ 0.592920] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 [ 0.592921] pci 0000:00:1c.0: IO window: disabled [ 0.592925] pci 0000:00:1c.0: MEM window: disabled [ 0.592928] pci 0000:00:1c.0: PREFETCH window: disabled [ 0.592933] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:03 [ 0.592935] pci 0000:00:1c.4: IO window: 0xe000-0xefff [ 0.592939] pci 0000:00:1c.4: MEM window: 0xfe600000-0xfe6fffff [ 0.592942] pci 0000:00:1c.4: PREFETCH window: disabled [ 0.592947] pci 0000:00:1c.5: PCI bridge, secondary bus 0000:04 [ 0.592948] pci 0000:00:1c.5: IO window: disabled [ 0.592952] pci 0000:00:1c.5: MEM window: 0xfe500000-0xfe5fffff [ 0.592955] pci 0000:00:1c.5: PREFETCH window: disabled [ 0.592959] pci 0000:00:1c.6: PCI bridge, secondary bus 0000:05 [ 0.592962] pci 0000:00:1c.6: IO window: 0xd000-0xdfff [ 0.592965] pci 0000:00:1c.6: MEM window: disabled [ 0.592969] pci 0000:00:1c.6: PREFETCH window: 0x000000d0000000-0x000000d00fffff [ 0.592975] pci 0000:06:00.0: PCI bridge, secondary bus 0000:07 [ 0.592978] pci 0000:06:00.0: IO window: 0xc000-0xcfff [ 0.592985] pci 0000:06:00.0: MEM window: 0xfe400000-0xfe4fffff [ 0.592990] pci 0000:06:00.0: PREFETCH window: 0xbfa00000-0xbfafffff [ 0.592998] pci 0000:00:1c.7: PCI bridge, secondary bus 0000:06 [ 0.593000] pci 0000:00:1c.7: IO window: 0xc000-0xcfff [ 0.593004] pci 0000:00:1c.7: MEM window: 0xfe400000-0xfe4fffff [ 0.593008] pci 0000:00:1c.7: PREFETCH window: 0xbfa00000-0xbfafffff [ 0.593017] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.593019] pci 0000:00:01.0: setting latency timer to 64 [ 0.593025] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.593028] pci 0000:00:1c.0: setting latency timer to 64 [ 0.593035] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.593038] pci 0000:00:1c.4: setting latency timer to 64 [ 0.593044] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16 [ 0.593047] pci 0000:00:1c.5: setting latency timer to 64 [ 0.593054] pci 0000:00:1c.6: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.593057] pci 0000:00:1c.6: setting latency timer to 64 [ 0.593064] pci 0000:00:1c.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 0.593067] pci 0000:00:1c.7: setting latency timer to 64 [ 0.593072] pci 0000:06:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.593077] pci 0000:06:00.0: setting latency timer to 64 [ 0.593080] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.593082] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.593083] pci_bus 0000:03: resource 0 io: [0xe000-0xefff] [ 0.593085] pci_bus 0000:03: resource 1 mem: [0xfe600000-0xfe6fffff] [ 0.593086] pci_bus 0000:04: resource 1 mem: [0xfe500000-0xfe5fffff] [ 0.593088] pci_bus 0000:05: resource 0 io: [0xd000-0xdfff] [ 0.593089] pci_bus 0000:05: resource 2 pref mem [0xd0000000-0xd00fffff] [ 0.593091] pci_bus 0000:06: resource 0 io: [0xc000-0xcfff] [ 0.593092] pci_bus 0000:06: resource 1 mem: [0xfe400000-0xfe4fffff] [ 0.593094] pci_bus 0000:06: resource 2 pref mem [0xbfa00000-0xbfafffff] [ 0.593095] pci_bus 0000:06: resource 3 io: [0x00-0xffff] [ 0.593096] pci_bus 0000:06: resource 4 mem: [0x000000-0xffffffff] [ 0.593098] pci_bus 0000:07: resource 0 io: [0xc000-0xcfff] [ 0.593099] pci_bus 0000:07: resource 1 mem: [0xfe400000-0xfe4fffff] [ 0.593101] pci_bus 0000:07: resource 2 pref mem [0xbfa00000-0xbfafffff] [ 0.593102] pci_bus 0000:07: resource 3 io: [0xc000-0xcfff] [ 0.593103] pci_bus 0000:07: resource 4 mem: [0xfe400000-0xfe4fffff] [ 0.593105] pci_bus 0000:07: resource 5 pref mem [0xbfa00000-0xbfafffff] [ 0.593106] pci_bus 0000:07: resource 6 io: [0x00-0xffff] [ 0.593108] pci_bus 0000:07: resource 7 mem: [0x000000-0xffffffff] [ 0.593120] NET: Registered protocol family 2 [ 0.593156] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.593261] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.593413] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.593487] TCP: Hash tables configured (established 131072 bind 65536) [ 0.593488] TCP reno registered [ 0.593518] NET: Registered protocol family 1 [ 0.593525] pci 0000:00:02.0: Boot video device [ 0.846777] Unpacking initramfs... [ 0.902276] Freeing initrd memory: 3471k freed [ 0.902765] audit: initializing netlink socket (disabled) [ 0.902772] type=2000 audit(1300612826.751:1): initialized [ 0.904979] highmem bounce pool size: 64 pages [ 0.904981] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.905625] VFS: Disk quotas dquot_6.5.2 [ 0.905649] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.905685] msgmni has been set to 1704 [ 0.905785] alg: No test for stdrng (krng) [ 0.905819] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.905821] io scheduler noop registered [ 0.905822] io scheduler anticipatory registered [ 0.905823] io scheduler deadline registered [ 0.905839] io scheduler cfq registered (default) [ 0.905900] pcieport 0000:00:01.0: irq 28 for MSI/MSI-X [ 0.905903] pcieport 0000:00:01.0: setting latency timer to 64 [ 0.905977] pcieport 0000:00:1c.0: irq 29 for MSI/MSI-X [ 0.905984] pcieport 0000:00:1c.0: setting latency timer to 64 [ 0.906073] pcieport 0000:00:1c.4: irq 30 for MSI/MSI-X [ 0.906079] pcieport 0000:00:1c.4: setting latency timer to 64 [ 0.906167] pcieport 0000:00:1c.5: irq 31 for MSI/MSI-X [ 0.906173] pcieport 0000:00:1c.5: setting latency timer to 64 [ 0.906260] pcieport 0000:00:1c.6: irq 32 for MSI/MSI-X [ 0.906267] pcieport 0000:00:1c.6: setting latency timer to 64 [ 0.906360] isapnp: Scanning for PnP cards... [ 1.259845] isapnp: No Plug & Play device found [ 1.260448] Linux agpgart interface v0.103 [ 1.260504] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.260591] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.260821] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.260904] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 1.260905] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 1.261483] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.261506] mice: PS/2 mouse device common for all mice [ 1.261532] rtc_cmos 00:05: RTC can wake from S4 [ 1.261550] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 1.261573] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 1.261579] cpuidle: using governor ladder [ 1.261580] cpuidle: using governor menu [ 1.261582] No iBFT detected. [ 1.261725] TCP cubic registered [ 1.261788] NET: Registered protocol family 10 [ 1.261977] lo: Disabled Privacy Extensions [ 1.262100] Mobile IPv6 [ 1.262102] NET: Registered protocol family 17 [ 1.262110] Using IPI No-Shortcut mode [ 1.262137] PM: Resume from disk failed. [ 1.262141] registered taskstats version 1 [ 1.262558] rtc_cmos 00:05: setting system clock to 2011-03-20 09:20:27 UTC (1300612827) [ 1.262592] Initalizing network drop monitor service [ 1.262604] Freeing unused kernel memory: 376k freed [ 1.262663] Write protecting the kernel text: 2504k [ 1.262673] Write protecting the kernel read-only data: 920k [ 1.270606] udev[76]: starting version 164 [ 1.277169] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 1.297226] SCSI subsystem initialized [ 1.300591] aic7xxx 0000:07:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 16.473099] scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0 [ 16.473101] [ 16.473102] aic7890/91: Ultra2 Wide Channel A, SCSI Id=7, 32/253 SCBs [ 16.473104] [ 16.505376] md: raid1 personality registered for level 1 [ 16.510137] device-mapper: uevent: version 1.0.3 [ 16.510197] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 16.729734] scsi 0:0:1:0: Direct-Access MAXTOR ATLAS10K5_73WLS JNZ3 PQ: 0 ANSI: 3 [ 16.729740] scsi0:A:1:0: Tagged Queuing enabled. Depth 8 [ 16.729746] scsi target0:0:1: Beginning Domain Validation [ 16.732288] scsi target0:0:1: wide asynchronous [ 16.734065] scsi target0:0:1: FAST-40 WIDE SCSI 80.0 MB/s ST (25 ns, offset 127) [ 16.735054] scsi target0:0:1: Domain Validation skipping write tests [ 16.735056] scsi target0:0:1: Ending Domain Validation [ 17.505218] scsi 0:0:5:0: Direct-Access MAXTOR ATLAS10K4_36WLS DFV0 PQ: 0 ANSI: 3 [ 17.505223] scsi0:A:5:0: Tagged Queuing enabled. Depth 8 [ 17.505228] scsi target0:0:5: Beginning Domain Validation [ 17.507716] scsi target0:0:5: wide asynchronous [ 17.509474] scsi target0:0:5: FAST-40 WIDE SCSI 80.0 MB/s ST (25 ns, offset 127) [ 17.510504] scsi target0:0:5: Domain Validation skipping write tests [ 17.510506] scsi target0:0:5: Ending Domain Validation [ 17.512770] scsi 0:0:6:0: Direct-Access MAXTOR ATLAS10K4_36WLS DFV0 PQ: 0 ANSI: 3 [ 17.512774] scsi0:A:6:0: Tagged Queuing enabled. Depth 8 [ 17.512779] scsi target0:0:6: Beginning Domain Validation [ 17.515279] scsi target0:0:6: wide asynchronous [ 17.517033] scsi target0:0:6: FAST-40 WIDE SCSI 80.0 MB/s ST (25 ns, offset 127) [ 17.518060] scsi target0:0:6: Domain Validation skipping write tests [ 17.518062] scsi target0:0:6: Ending Domain Validation [ 19.569595] sd 0:0:6:0: [sdc] 71833096 512-byte logical blocks: (36.7 GB/34.2 GiB) [ 19.569723] sd 0:0:5:0: [sdb] 71833096 512-byte logical blocks: (36.7 GB/34.2 GiB) [ 19.569767] sd 0:0:1:0: [sda] 143666192 512-byte logical blocks: (73.5 GB/68.5 GiB) [ 19.570852] sd 0:0:1:0: [sda] Write Protect is off [ 19.570856] sd 0:0:1:0: [sda] Mode Sense: bf 00 10 08 [ 19.571422] sd 0:0:6:0: [sdc] Write Protect is off [ 19.571425] sd 0:0:6:0: [sdc] Mode Sense: ed 00 10 08 [ 19.571533] sd 0:0:5:0: [sdb] Write Protect is off [ 19.571536] sd 0:0:5:0: [sdb] Mode Sense: ed 00 10 08 [ 19.571640] sd 0:0:1:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 19.572817] sd 0:0:6:0: [sdc] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 19.572928] sd 0:0:5:0: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 19.573871] sda: unknown partition table [ 19.576433] sdc: [ 19.576544] sdb: sdc2 < sdb1 sdb2 < sdc5 > [ 19.577816] sd 0:0:1:0: [sda] Attached SCSI disk [ 19.579084] sdb5 > [ 19.580257] sd 0:0:6:0: [sdc] Attached SCSI disk [ 19.587504] sd 0:0:5:0: [sdb] Attached SCSI disk [ 20.146840] EXT4-fs (sdb1): mounted filesystem with ordered data mode [ 20.727119] udev[417]: starting version 164 [ 20.988379] ACPI: SSDT baddbc18 0038C (v01 AMI IST 00000001 MSFT 03000001) [ 20.988550] ACPI: SSDT baddce18 00084 (v01 AMI CST 00000001 MSFT 03000001) [ 20.988765] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 [ 20.988838] ACPI: Power Button [PWRB] [ 20.988904] Monitor-Mwait will be used to enter C-2 state [ 20.988919] Monitor-Mwait will be used to enter C-3 state [ 20.988966] processor LNXCPU:00: registered as cooling_device0 [ 20.988995] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 20.988997] ACPI: Power Button [PWRF] [ 20.989495] processor LNXCPU:01: registered as cooling_device1 [ 20.989973] processor LNXCPU:02: registered as cooling_device2 [ 20.990414] processor LNXCPU:03: registered as cooling_device3 [ 21.016158] input: PC Speaker as /devices/platform/pcspkr/input/input3 [ 21.046511] parport_pc 00:03: reported by Plug and Play ACPI [ 21.046555] parport0: PC-style at 0x378, irq 5 [PCSPP] [ 21.076302] usbcore: registered new interface driver usbfs [ 21.076313] usbcore: registered new interface driver hub [ 21.076366] usbcore: registered new device driver usb [ 21.077579] Intel(R) PRO/1000 Network Driver - version 7.3.21-k5-NAPI [ 21.077581] Copyright (c) 1999-2006 Intel Corporation. [ 21.077604] e1000 0000:07:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 21.100308] libata version 3.00 loaded. [ 21.108848] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 21.108865] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 21.108874] ehci_hcd 0000:00:1a.0: setting latency timer to 64 [ 21.108876] ehci_hcd 0000:00:1a.0: EHCI Host Controller [ 21.108886] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 21.108902] ehci_hcd 0000:00:1a.0: debug port 2 [ 21.109450] xhci_hcd 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 21.109463] xhci_hcd 0000:04:00.0: setting latency timer to 64 [ 21.109466] xhci_hcd 0000:04:00.0: xHCI Host Controller [ 21.109471] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 2 [ 21.112797] ehci_hcd 0000:00:1a.0: cache line size of 32 is not supported [ 21.112807] ehci_hcd 0000:00:1a.0: irq 23, io mem 0xfe706000 [ 21.116592] xhci_hcd 0000:04:00.0: irq 17, io mem 0xfe500000 [ 21.121633] usb usb2: config 1 interface 0 altsetting 0 endpoint 0x81 has no SuperSpeed companion descriptor [ 21.121638] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 21.121640] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 21.121641] usb usb2: Product: xHCI Host Controller [ 21.121642] usb usb2: Manufacturer: Linux 2.6.32-5-686 xhci_hcd [ 21.121644] usb usb2: SerialNumber: 0000:04:00.0 [ 21.121681] usb usb2: configuration #1 chosen from 1 choice [ 21.121683] xHCI xhci_add_endpoint called for root hub [ 21.121684] xHCI xhci_check_bandwidth called for root hub [ 21.121698] hub 2-0:1.0: USB hub found [ 21.121701] hub 2-0:1.0: 4 ports detected [ 21.125771] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 21.125788] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 21.125790] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 21.125791] usb usb1: Product: EHCI Host Controller [ 21.125792] usb usb1: Manufacturer: Linux 2.6.32-5-686 ehci_hcd [ 21.125794] usb usb1: SerialNumber: 0000:00:1a.0 [ 21.125826] usb usb1: configuration #1 chosen from 1 choice [ 21.125841] hub 1-0:1.0: USB hub found [ 21.125844] hub 1-0:1.0: 2 ports detected [ 21.125874] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 21.125886] ehci_hcd 0000:00:1d.0: setting latency timer to 64 [ 21.125888] ehci_hcd 0000:00:1d.0: EHCI Host Controller [ 21.125891] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3 [ 21.125907] ehci_hcd 0000:00:1d.0: debug port 2 [ 21.129778] ehci_hcd 0000:00:1d.0: cache line size of 32 is not supported [ 21.129781] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xfe705000 [ 21.141734] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 21.141749] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 21.141751] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 21.141753] usb usb3: Product: EHCI Host Controller [ 21.141754] usb usb3: Manufacturer: Linux 2.6.32-5-686 ehci_hcd [ 21.141755] usb usb3: SerialNumber: 0000:00:1d.0 [ 21.141787] usb usb3: configuration #1 chosen from 1 choice [ 21.141804] hub 3-0:1.0: USB hub found [ 21.141807] hub 3-0:1.0: 2 ports detected [ 21.143271] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 21.227239] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 21.227251] r8169 0000:05:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 21.227282] r8169 0000:05:00.0: setting latency timer to 64 [ 21.227286] r8169 0000:05:00.0: unknown MAC, using family default [ 21.227340] r8169 0000:05:00.0: irq 33 for MSI/MSI-X [ 21.227612] eth0: RTL8168b/8111b at 0xf82dc000, bc:ae:c5:de:75:3d, XID 0c200000 IRQ 33 [ 21.228509] ata_piix 0000:00:1f.2: version 2.13 [ 21.228520] ata_piix 0000:00:1f.2: PCI INT B -> GSI 20 (level, low) -> IRQ 20 [ 21.228523] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] [ 21.267176] pata_via 0000:03:00.0: version 0.3.4 [ 21.267188] pata_via 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 21.267215] pata_via 0000:03:00.0: setting latency timer to 64 [ 21.267271] scsi1 : pata_via [ 21.267348] scsi2 : pata_via [ 21.267475] ata1: PATA max UDMA/133 cmd 0xe040 ctl 0xe030 bmdma 0xe000 irq 16 [ 21.267477] ata2: PATA max UDMA/133 cmd 0xe020 ctl 0xe010 bmdma 0xe008 irq 16 [ 21.289896] Error: Driver 'pcspkr' is already registered, aborting... [ 21.347571] e1000: 0000:07:01.0: e1000_probe: (PCI:33MHz:32-bit) 00:1b:21:0c:67:2b [ 21.382717] ata_piix 0000:00:1f.2: setting latency timer to 64 [ 21.382934] scsi3 : ata_piix [ 21.383147] scsi4 : ata_piix [ 21.383890] ata3: SATA max UDMA/133 cmd 0xf110 ctl 0xf100 bmdma 0xf0d0 irq 20 [ 21.383895] ata4: SATA max UDMA/133 cmd 0xf0f0 ctl 0xf0e0 bmdma 0xf0d8 irq 20 [ 21.383966] ata_piix 0000:00:1f.5: PCI INT B -> GSI 20 (level, low) -> IRQ 20 [ 21.383970] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ] [ 21.437571] usb 1-1: new high speed USB device using ehci_hcd and address 2 [ 21.524158] e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network Connection [ 21.536827] ata_piix 0000:00:1f.5: SCR access via SIDPR is available but doesn't work [ 21.536840] ata_piix 0000:00:1f.5: setting latency timer to 64 [ 21.536981] scsi5 : ata_piix [ 21.537040] scsi6 : ata_piix [ 21.537702] ata5: SATA max UDMA/133 cmd 0xf0b0 ctl 0xf0a0 bmdma 0xf070 irq 20 [ 21.537704] ata6: SATA max UDMA/133 cmd 0xf090 ctl 0xf080 bmdma 0xf078 irq 20 [ 21.569150] usb 1-1: New USB device found, idVendor=8087, idProduct=0024 [ 21.569154] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 21.569228] usb 1-1: configuration #1 chosen from 1 choice [ 21.569401] hub 1-1:1.0: USB hub found [ 21.569506] hub 1-1:1.0: 6 ports detected [ 21.680490] usb 3-1: new high speed USB device using ehci_hcd and address 2 [ 21.812624] usb 3-1: New USB device found, idVendor=8087, idProduct=0024 [ 21.812628] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 21.812697] usb 3-1: configuration #1 chosen from 1 choice [ 21.812869] hub 3-1:1.0: USB hub found [ 21.812977] hub 3-1:1.0: 8 ports detected [ 22.406720] ata4.00: failed to resume link (SControl 0) [ 22.737882] ata3.01: failed to resume link (SControl 0) [ 22.893584] ata3.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 22.893604] ata3.01: SATA link down (SStatus 0 SControl 0) [ 22.929192] ata3.00: ATA-8: ST31500341AS, CC1H, max UDMA/133 [ 22.929196] ata3.00: 2930277168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 22.985556] ata3.00: configured for UDMA/133 [ 22.985703] scsi 3:0:0:0: Direct-Access ATA ST31500341AS CC1H PQ: 0 ANSI: 5 [ 22.985835] sd 3:0:0:0: [sdd] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB) [ 22.986017] sd 3:0:0:0: [sdd] Write Protect is off [ 22.986020] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 22.986094] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 22.986423] sdd: unknown partition table [ 22.992751] sd 3:0:0:0: [sdd] Attached SCSI disk [ 23.432235] ata4.01: failed to resume link (SControl 0) [ 23.442936] ata4.00: SATA link down (SStatus 4 SControl 0) [ 23.442948] ata4.01: SATA link down (SStatus 0 SControl 0) [ 23.447503] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 23.447525] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 24.153275] md: md0 stopped. [ 24.154015] md: bind [ 24.154169] md: bind [ 24.193558] raid1: raid set md0 active with 2 out of 2 mirrors [ 24.193570] md0: detected capacity change from 0 to 36275412992 [ 24.194250] md0: unknown partition table [ 24.737833] loop: module loaded [ 25.292911] Adding 1949688k swap on /dev/mapper/rootvg-swaplv. Priority:-1 extents:1 across:1949688k [ 25.660999] EXT4-fs (dm-3): mounted filesystem with ordered data mode [ 25.691335] EXT4-fs (dm-1): mounted filesystem with ordered data mode [ 25.717503] EXT4-fs (dm-2): mounted filesystem with ordered data mode [ 25.739321] EXT4-fs (dm-4): mounted filesystem with ordered data mode [ 25.779562] kjournald starting. Commit interval 5 seconds [ 25.779863] EXT3 FS on dm-6, internal journal [ 25.779868] EXT3-fs: mounted filesystem with ordered data mode. [ 25.784553] EXT4-fs (dm-0): mounted filesystem with ordered data mode [ 26.546028] 802.1Q VLAN Support v1.8 Ben Greear [ 26.546030] All bugs added by David S. Miller [ 26.566780] r8169: eth0: link up [ 26.566814] r8169: eth0: link up [ 26.694394] PPP generic driver version 2.4.2 [ 27.003121] NET: Registered protocol family 24 [ 47.705810] lp0: using parport0 (interrupt-driven). [ 47.728392] ppdev: user-space parallel port driver [ 50.558668] ip_tables: (C) 2000-2006 Netfilter Core Team [ 50.618182] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 50.618274] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use [ 50.618275] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or [ 50.618276] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.